Printable Catalog WMeShop.com

Revitalizant for compressors and bearings

Treatment procedure for all types of compressors with XADO revitalizing compounds (except cylinder piston groups in oxygen compressors)

1. Only compressors with less than 100 % wear are subject to treatment.
2. Before treatment it is necessary to make metering of the basic performance specifications of the compressor functioning.
   1. Determine the time of reaching operating pressure of the compressor.
   2. Measure vibration level.
   3. Measure noise level.
   4. Measure power consumption (or consumption current) of electric motor at idling.
   5. Measure oil pressure.
   6. Determine temperature condition.
3. Compressors are treated with XADO revitalizant gel for compressors and bearings in 3 stages without oil change according to the following procedure:
   1. Prepare XADO gel for compressor treatment.
   2. Pour some regular oil (1 –2 l) warmed up to 60 ^oС (140 ^oF) into a separate vessel, dissolve there the rated amount of XADO revitalizant gel for compressors and bearings to be added into the crankcase (1.2 ml for 1 liter of regular oil at a time).
   3. If for the lubrication of cylinder piston group a lubricator is used, then dissolve similarly XADO revitalizant gel for compressors and bearings in another vessel (1.2 ml for 1 liter of lubricator oil) and add it to the oil volume required for ensuring compressor operation during 200 hours. For example, hourly oil consumption through the lubricator is equal 0.225 l, what comes to 45 l during 200 hours of continuous operation. The rated amount of revitalizant gel required for ensuring constant concentration is: 45 l x 1.2 ml = 54 ml. If lubricator is missing, then compressor treatment is carried out with revitalizant gel only, added into the crankcase with regular oil.
   4. Stir thoroughly each compound to obtain homogenous mixture.
   5. Add the first compound into compressor crankcase.
   6. The second compound is added together with the lubricator in slight amounts (before adding each dose the oil should be thoroughly stirred) according to oil consumption (during 200 operation hours).
   7. Switch on the compressor.
4. The second and third treatment stages should be carried out in 8 hours interval of total operation of compressor similar to the first stage.
5. The treatment of compressor is considered to be finished after 400 hours of compressor operation beginning from the first treatment stage.
6. After finishing of the compressor treatment one should make metering of the basic performance specifications indicated in item 2.2.
7. In case of need the results of metering before and after treatment with XADO revitalizant are documented in the form of technical statement.

Note !

Cylinder piston groups, where graphite or flubon (antifriction polymer composite materials) piston rings are used, are not subject to treatment with XADO revitalizants.
For maintaining permanent concentration of XADO revitalizant in regular oil it is necessary during the first 200 hours of operation to compensate for oil consumed by adding oil with XADO revitalizant gel diluted on the basis of 1.2 ml for one liter of additional oil.

• removing of cavities and weakness;
• ensuring of absolute obturation (fit) of the barrel;
• better quality of shooting;
• increase of bullet velocity;
• increase of bullet wounding power;
• augmented grouping of shots;
• better rust protection;
• longer service life of the barrel;

• Reconditioning and protection against wear of barrel bore surface;
• Restoration of the geometry of the barrel bore (complete obturation);
• Maximum killing power for a given ammunition;
• 10 times increased wear resistance and endurance of the barrel;
• Enhanced grazing effect of the shot;
• Augmented grouping of the shot;
• Bullet outlet velocity increased by 5-15 m/s for new barrels;
• Bullet outlet velocity increased by 20% for worn barrels;
• Reduced vibration of the barrel.

1. In regular intervals, a thin layer to put a base varnish - revitalisant (a bottle 1) on a surface of a bullet.
2. In 10 minutes to open a bullet protective it is delicious (a bottle 2).
3. To give a layer of a varnish finally dry out within 1 hour.
4. Cartridge to use as usual, without restrictions.
5. Provisional norm of the charge: one packing of a varnish on 200 cartridges of calibre 7,62х39.

1. - base varnish - revitalisant for the first layer (10 ml).
2. - protective varnish for a finishing covering (10 ml).

Metal conditioner XADO Tuning.

• modify surface friction (due to effect of revitalization);
• improve the lubricating properties of oil.

• complex (two-part) of the metal conditioner plus atomic revitalizant.

Advantages

Application instructions

Note

RF * 33,3 means that the engine is protected from this deterioration.
RF (Revitalization Factor) - indicator of the effectiveness of rehabilitation and protection against wear. Max - 100,0.

Package:

Expels contaminations from the hard-to-reach places of trigger and breech-mechanisms quickly.
Special cleaning components of the grease dissolve the powder deposits in the barrel bore easily.
Lubricates threaded, rotary and pinning joints; protects them from corrosion.
Guarantees perfect operation of the arms.

Due to revitalizant the grease keeps the surface of the barrel bore in top condition.
Doesn’t contain alkali, neutral to plastic, wood, colored and lacquered surfaces, blueing.

APPLICATION
Shake the can.
Spray on the parts and mechanisms of the arms.
The arms do not need to be wiped dry.

Package: 75 ml tube
Added to Inventory on: Monday 04 September, 2006
Manufacturer: XADO

Price: $19.00 USD

APPLICATION
Shake the can.
Spray on the parts and mechanisms of the arms.
The arms do not need deconservation after storage.

Package: 75 ml tube
Added to Inventory on: Monday 04 September, 2006
Manufacturer: XADO

Price: $19.00 USD

Regular application of metal conditioner TURBO ensures:

Application instructions:

APPLICATION PROCEDURE:
Add the content into the oil filler neck of the warmed up engine in the volume of 3 - 6 % from the nominal volume of the oil system. Idle the engine for 3 min. Run the car in a regular operating mode without any restrictions.

!!! Does not contain fluoropolymers, graphite, ferrous and non-ferrous metals, ceramics, esters. Safe for turbines, oxygen sensors, probes and catalysts. Nontoxic and not flammable. The product is compatible with any kind of motor oil and other lubricants. Does not change oil viscosity!

Application of METAL CONDITIONER® for engines allows to:

• improve engine power and rotation moment;
• reduce noise and vibration;
• extend life span of the engine by 4 times!
• decrease fuel consumption by 10
• reduce harmful emissions.

APPLICATION PROCEDURE:

• Shake the can.
• Spray the content into the oil filler neck of a mechanical transmission, transfer box or an axle gear.
• Run the car in a regular operating mode without any restrictions.

!!! Does not contain fluoropolymers, graphite, ferrous and non-ferrous metals, ceramics, esters. Nontoxic and not flammable. The product is compatible with any kind of transmission oils and other lubricants for transmissions.
Does not change oil viscosity!

Application of METAL CONDITIONER® for transmissions allows to:

• reduce noise and vibration;
• extend life span of transmission parts by 4 times!
• decrease fuel consumption, especially in cars with cross-country capacity after the treatment of a transmission, transfer box or an axle gear.

• decrease of the charge of oil;
• increase of capacity of the engine;
• alignment compression on cylinders;
• decrease of noise at work of the engine;
• exception probable overheating of the piston;
• decrease of a level CO in exhaust gases of the engine;
• removal of carbon adjournment on candles of ignition.

1. To warm up the engine. The motor should be warm, but not hot.
2. To turn out candles. To disconnect a socket of the gauge of distribution of ignition, gauge of a Hall and switchboard.
3. To squeeze out on one tube in each cylinder. To screw up candles back. To wait for 20 mines. To unscrew candles. To cover apertures with an absorbing fabric, that the taking off dirt has not got on a paint, and to turn the engine some seconds.
4. To establish on a place of a candle.
5. To start the engine and to give to work at the raised frequency of the shaft 15-20 minutes. For this time the rests of the softened coke will be removed through system of release of the fulfilled gases.

1. To squeeze out 4 tubes in the engine oil at the rate of 40 ml of structure on 3-5 l of oil.
2. To work idling 10-15 minutes.
3. To merge oil to change the oil filter.

Complex formula VERYLUBE Diesel-Lux

Technical info

Dosage
DIESEL-LUX WINTER (for winter season)
For 50 liters of fuel, depending on the ambient air temperature, °C:
• from 0 to -20 ................1 tube
• from -20 to -30................ 2 tubes
• from -30 to -40................ 3 tubes

DIESEL-LUX SUMMER (for summer season)
• Repairing dosage (once) - 1 tube per 20 L of fuel.
• Preventive dosage (with every refueling) - 1 tube per 50 L of fuel.

Advantages

Note:
Can be used with all types of fuel.
VERYLUBE DIESEL-LUX WINTER is introduced when warmed up to the temperature of 68...77 F into non-thickened (transparent) diesel fuel.

Expert's Advice
To make the application easy, squeeze the content of the tube into the refueling nozzle before filling.

Complex purifier VERYLUBE Petrol Tank

1. Amani fe el sharq : Mazen Zawidey
2. Disco el sharq : Farook Salama
3. Windows of the east : Ron Goodwin & his orchestra
4. Mirjanah : Ihsan El Munthir
5. Samara : Suheil Faris
6. Beaad : Ahmed Fouad Hassan Group
7. Noura : Ammar El Sharie
8. Ana fi entizarak : Farook Salama
9. Hicaz dolap : Esin Engin and orchestra
10. Belly dance steps : Naseer Al Assad
11. Arabian rhapsody (1) : Omar Khairat