Revitalizant gel XADO for gear boxes, transfer cases and differentials
The compound is designed for restoring repair of the gear boxes, bearings, reducers and other units of transmissions and for wear protection.
The gel forms a new cermet coating with unique properties on friction surfaces and restores geometry of the parts.
Main results of the treatment
- rubbing parts are reconditioned and protected against wear;
- restored geometry of the parts;
- elimination of pits and scratches on working surfaces;
- reduction of noise and vibration by 10 times;
- possibility of long operation after an accidental oil leakage.
Main advantages of the treatment
- disassembly is not required;
- universality;
- fast effect.
Recommendations
Although the breakdown of gearbox takes place not very often its repair and disassembly are complicated and expensive. XADO will help and it is still possible to "cure" overheating, difficult gearshift, grinding sounds in the gearbox or the noise of differential but the better way is to do it in advance and not wait for the symptoms of disease.
Procedure of treating
1. Squeeze out the revitalizant into the oil filler neck of gear box, transfer case or differential according to the following chart.
2. Revitalizing is considered to be complete after 50 operating hours or 930 miles (1,500 km) run.
Note!
1. The sure sign of the beginning of revitalization is mechanism noise reduction as early as the first few miles. If noise reduction improvement of mechanism running) stops at any time, this fact points to a heavy wear of the mechanism, so it is necessary to double the ecommended dose.
2. If after 60 - 120 miles (100-200 km) run the mechanism fails to improve its performance, the most probable cause of this is a faulty diagnostics.
3. DO NOT use in automatic transmission!
| Lubrication system capacity ltrs. |
Number of tubes |
Treatment scheme |
| 1 to 2 |
1 |
Single Application |
| 2 to 5 |
2 |
Single Application |
| 5 to 8 |
3 |
Single Application |
|
